MOTIVATION: The size up of a structure fire by the initial arriving officer sets the tone for the eventual outcome of the incident. Being able to read what has happened and what will happen after arrival affects the deployment of resources and the ultimate safety of all personnel operating on the scene.
OBJECTIVE (SPO): 1-1
The individual will demonstrate a basic understanding of size up for a structural fire incident.
HOW GOOD IS YOUR SIZE UP?
* Pre-arrival Information
* Structure Involved
* Fire Conditions
* Scene Priorities
* Risk Assessment
HOW GOOD IS YOUR SIZE UP?
SPO 1-1 The individual will demonstrate a basic understanding of size up for a structural fire incident.
EO 1-1 Demonstrate an understanding of the information that can be obtained prior to arrival at the
EO 1-2 Demonstrate an understanding of how the fire building can affect size up decisions.
EO 1-3 Demonstrate an understanding of how fire conditions can affect the size up decisions.
EO 1-4 Demonstrate an understanding of the scene priorities that must be addressed during the size up
EO 1-5 Demonstrate an understanding of the risk assessment that must be made during the size up
This drill should be conducted as an interactive session for not only operational officers but all operational personnel. Each participant may have something to contribute to the drill as well as the scene size up.
Before starting it may be appropriate to make sure that everyone understands what size up is. It is considered to be an evaluation or assessment of the situation and is a continuing process that begins prior to the incident and continues after the conclusion of the incident when lessons learned from the incident can be incorporated into future planning.
A. PRE-ARRIVAL INFORMATION (EO 1-1)
1. Building pre-fire plans, if available
2. Area maps with access and water source information
3. Type of occupancy and potential occupancy level
4. Weather conditions
5. Time of day and day of week
6. Apparatus responding (may indicated delayed arrival)
7. Minimum staffing (if such a standard exists)
B. STRUCTURE INVOLVED (EO 1-2)
1. Type of structure
e. Health care
f. House of worship
a. Fire resistant
d. Heavy timber
3. Access points and obstacles to access
4. Designation of sides, exposures, and floors
5. Potential hazards
a. Structural collapse (collapse zone based on height of building)
b. Closed containers
c. Utility service
One of the first things that may need to be done is to make a quick check of the building so that a view of as many sides of the building as possible is made.
It may be necessary to stage responding apparatus near the scene until all the necessary information about fire location and potential rescues is known.
C. FIRE CONDITIONS (EO 1-3)
1. Location of smoke and fire (if visible from the exterior)
2. Color of smoke and flames
a. White smoke – hay, forest, vegetable composition, phosphorous
b. Yellow smoke – nitrate film, sulphur, sulphuric acid, smokeless powder
c. Black smoke – petroleum base, rubber, tar
d. Red flame – petroleum base
e. Blue flame – alcohol (small quantities)
f. Orange flame – alcohol (large quantities)
3. Intensity of fire
4. Fire impact on structure
5. Water requirements
a. One cubic foot of oxygen will produce 535 BTU’s of heat
b. Normal air contains 20% oxygen
c. Flame production arrested at 14% oxygen
d. Oxygen available to produce heat is 7%