# Air Bag Operations – Part 2: The Science of Lifting

## Air bag lifting capacity is based on simple physics. The operating pressure of the bag, in pounds per square inch (PSI), is multiplied over the entire surface area of the bag to equal lifting force. This article aims to explain how to calculate the air...

Air bag lifting capacity is based on simple physics. The operating pressure of the bag, in pounds per square inch (PSI), is multiplied over the entire surface area of the bag to equal lifting force. This article aims to explain how to calculate the air bag’s actual lifting capacity. It is essential that members have a firm grasp of lifting capacities to ensure that they select the proper bags for the task at hand.

Bag Ratings/Power Curve

Each air bag has a maximum lift capacity, as well as a maximum lift height. The maximum lift capacity is listed on the bag in tons, and it is based on the surface area of the bag (see Photo 1). The system’s operating pressure is spread equally across the bag’s entire surface and creates lift force. The greater the surface area, the greater the lift force, which results in increased lift capacity.

Each air bag also has a maximum lift height. This is the height of the bag at maximum inflation. It is important to realize that the maximum lift capacity cannot be achieved at the maximum lift height. This is the concept known as the power curve. The power curve is the negative correlation between lift height and lift capacity. The lifting capacity of the air bag decreases as the lifting height increases. This is due to less surface area being in contact with the object being lifted. The air bag’s maximum lift capacity listed on the bag can only be achieved until the center of the bag is inflated approximately one-inch.

Lift Capacity Math

Each air bag has a theoretical lift capacity and an actual lift capacity. The theoretical capacity is what the bag should be capable of lifting if the entire dimensions of the bag are in contact with a solid surface below and with the object to be lifted. The actual lift capacity is what the bag will be able to lift given the surface area of the bag that is actually in contact with the object being lifted. It is critical that members understand the difference between the two capacities, as the theoretical lift capacity can be significantly more than what the bag will actually lift.

Theoretical Lift Capacity Math Formula:

• Air Bag Length x Air Bag Width x Operating Pressure in PSI = Theoretical Lift Capacity in Pounds

Theoretical Lift Capacity Math – Example 1:

• Utilizing a 20-inch x 20-inch bag operating at 116 PSI
• 20-inch x 20-inch x 116 PSI = 46,400 pounds (23.2 tons)

Each air bag has approximately ¼-inch to ¾-inch of seams on all sides, depending on the bag size and the manufacturer. These seams reduce the actual working surface of the air bag by ½-inch to 1½-inch from the start. Therefore, a 20-inch x 20-inch bag may have an actual working surface area of 19 inches x 19 inches.

Modified Theoretical Lift Capacity Math – Example 1:

• Utilizing the same 20-inch x 20-inch bag operating at 116 PSI
• Realizing that the bag has an actual working surface of 19 inches x 19 inches
• 19 inches x 19 inches x 116 PSI = 41,876 pounds (20.94 tons)
• This is the capacity that is normally listed on the air bag

The next factor that we need to take into account is the surface area of the bag that is in contact with the object being lifted. The air bag takes on a pillow shape as it is inflated, which reduces the surface area in contact with the object (Photo 2). Members need to calculate the surface area that is in contact with the object in order to get the actual lift capacity of the bag.

Actual Lift Capacity Math Formulas:

• Actual Length x Actual Width x Percent of Bag in Contact with Object x Operation Pressure in PSI = Actual Lift Capacity in Pounds

Actual Lift Capacity Math – Example 1:

• Utilizing the same 20-inch by 20-inch bag operating at 116 PSI
• Realizing the actual working area of the bag is 19 inches x 19 inches
• With 75% of the bag in contact with the object being lifted
• 19 inches x 19 inches x .75 x 116 PSI = 31,407 pounds (15.7 tons)

Actual Lift Capacity Math – Example 2:

• Same scenario as Example 1, but with only 25% of the bag in contact with the object being lifted
• 19 inches x 19 inches x .25 x 116 PSI = 10,469 pounds (5.23 tons)
This content continues onto the next page...