inspection strategy for paint spray operations

[Rudyscustom]

Does anyone out there have a SOG on inspecting paint spray booths? I'm developing an inspection strategy and could use some help.

[fireisrael]

hi,

you can use NFPA33-"Standard for Spray Application Using Flammable or Combustible Materials".Document Scope: 1.1.1 This standard shall apply to the spray application of flammable or combustible materials, as herein defined, either continuously or intermittently, by any of the following methods: (1) Compressed air atomization (2) Airless or hydraulic atomization (3) Electrostatic application methods (4) Other means of atomized application 1.1.2 This standard shall also apply to the application of flammable or combustible materials, as herein defined, either continuously or intermittently, by any of the following methods: (1) Fluidized bed application methods (2) Electrostatic fluidized bed application methods (3) Other means of fluidized application 1.1.3 This standard shall also apply to spray application of water-borne, water-based, and water-reducible materials that contain flammable or combustible liquids or that produce combustible deposits or residues. 1.1.4* This standard shall not apply to spray application processes or operations that are conducted outdoors. 1.1.5* This standard shall not apply to the use of small portable spraying equipment or aerosol products that are not used repeatedly in the same location. 1.1.6 This standard shall not apply to the spray application of noncombustible materials. 1.1.7 This standard shall not apply to the hazards of toxicity or industrial health and hygiene. (See 1.2.2.) .

http://www.goffscurtainwalls.com/pdfs/2000_nfpa33.pdf