Hello everyone, been trolling a while and finally have a reason to post a question.
My dept. has a newer e-one typhoon pumper outfitted with akron valves with a problem I can't seem to solve.
After pumping with the truck, (regardless of having flowed any water or not) the deluge gun will glug out maybe 1/2 to 1 gallons of water after taking the truck out of pump gear. It doesn't leak a drop while in pump, and the valve has not been disturbed during the whole process.
All I can figure is water is getting past the ball and seat after the pressure is relieved, somehow to a point higher than the water level in the tank.
All I know is the guys at the station are tired of mopping, and all i can tell them is to open the bleeder before parking it after pumping.
+ Reply to Thread
Results 1 to 1 of 1
Thread: Leaking deck gun?
12-30-2008, 08:31 AM #1
- Join Date
- Oct 2008
Leaking deck gun?If you can't fix it with a hammer, you have an electrical problem.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By ltstreetmedic in forum Hazardous Materials General ForumReplies: 44Last Post: 09-18-2009, 04:30 PM
By kfed in forum Firefighters ForumReplies: 23Last Post: 10-28-2007, 09:08 PM
By tfpd109 in forum The EngineerReplies: 9Last Post: 05-06-2006, 05:22 AM
By captstanm1 in forum Fire WireReplies: 0Last Post: 10-31-2003, 06:43 AM