Thread: Nfpa 1975

  1. #1
    MembersZone Subscriber

    Join Date
    Apr 2005
    Location
    Kentucky
    Posts
    4

    Default Nfpa 1975

    Does any one know if NFPA 1975 is just for manufactures of Station clothes (uniforms). Or if it also specifies that Departments that issue uniforms follow the standard. I thought I had read somewhere that Departments were supposed to issue 100 % cotton for uniforms or another non melting aka non polyester based uniform. Does anyone have any thoughts on this? My department currently issues station clothing that is mostly polyester or a mix. If it is not specified in NFPA is it specified somewhere else?

  2. #2
    Forum Member

    Join Date
    Nov 2009
    Posts
    3,909

    Default

    Will look through 1975

    You can look at any Nfpa free, just sign up, not easy to read the free way and do not think you can print it

    http://www.nfpa.org/aboutthecodes/Ab...ookie%5Ftest=1

  3. #3
    MembersZone Subscriber

    Join Date
    Apr 2005
    Location
    Kentucky
    Posts
    4

    Default

    Quote Originally Posted by fire49 View Post
    Will look through 1975

    You can look at any Nfpa free, just sign up, not easy to read the free way and do not think you can print it

    http://www.nfpa.org/aboutthecodes/Ab...ookie%5Ftest=1
    I looked through 1975 but did not find anything specific about department requirements it appeared to all be related to requirements for manufactures. But as you said it can be difficult to read so I may have missed something.

  4. #4
    Forum Member

    Join Date
    Nov 2009
    Posts
    3,909

    Default

    This is a 1998 paper, and I did not read the entire thing, just the intor, but may help answer your question:::


    http://www.usfa.fema.gov/pdf/efop/efo28155.pdf

    also the scope of 1975 seems to say if your department has adopted 1975, then yes it does apply, but






    NFPA 1975: Document Scope




    1.1 Scope. 1.1.1 This standard shall specify requirements for the design, performance, testing, and certification of nonprimary protective station/work uniforms and the individual garments comprising station/work uniforms. 1.1.2 This standard shall also specify requirements for the thermal stability of textiles used in the construction of station/work uniforms. 1.1.3 This standard shall also specify optional requirements for flame resistant textiles where such textiles are specified or claimed to be used in construction of station/work uniforms. 1.1.4 This standard shall not specify requirements for clothing that is intended to provide primary protection from given hazard exposures. 1.1.5* Certification of station/work uniforms to the requirements of this standard shall not preclude certification to additional applicable standards for primary protective clothing where the clothing meets all requirements of each standard. A.1.1.5 Station/work uniforms that are certified as compliant only with NFPA 1975 are not primary protective garments and cannot be relied on to provide protection from specific hazards, such as those encountered during structural or wildland fire fighting. Other standards are written for garments that provide primary protection for specific hazards to which fire fighters can be exposed while participating in emergency operations or training. However, compliant station/work uniforms could also be certified to another standard for primary protective garments and thus be both a primary protective garment for the specific hazard that the other standard addresses and a station/work uniform that is compliant with NFPA 1975. Station/work uniforms that receive such dual certification (to NFPA 1975 and to a primary protective garment standard) would always exceed the minimum requirements of NFPA 1975. Examples of primary protective garment standards include, but are not limited to, NFPA 1951, Standard on Protective Ensembles for Technical Rescue Incidents; NFPA 1977, Standard on Protective Clothing and Equipment for Wildland Fire Fighting; NFPA 1994, Standard on Protective Ensembles for First Responders to CBRN Incidents; and NFPA 1999, Standard on Protective Clothing for Emergency Medical Operations. 1.1.6 This standard shall not be construed as addressing all of the safety concerns associated with the use of compliant station/work uniform garments for their personnel. It shall be the responsibility of the persons and organizations that use compliant station/work uniform garments to establish safety and health practices and determine the applicability of regulatory limitations prior to use. 1.1.7 This standard shall not be construed as addressing all of the safety concerns, if any, associated with the use of this standard by testing facilities. It shall be the responsibility of the persons and organizations that use this standard to conduct testing of station/work uniform garments to establish safety and health practices and determine the applicability of regulatory limitations prior to using this standard for any designing, manufacturing, and testing. 1.1.8* This standard shall not specify requirements for any accessories that could be attached to the certified product but are not necessary for the certified product to meet the requirements of this standard. A.1.1.8 Emergency response organizations are cautioned that accessories are not a part of the certified product but could be attached to the certified product by a means not engineered, manufactured, or authorized by the manufacturer. Emergency response organizations are cautioned that if the accessory or its means of attachment causes the structural integrity of the certified product to be compromised, the certified product might not comply with the standard for which it was designed, manufactured, and marketed. Additionally, if the accessory or its attachment means are not designed and manufactured from materials suitable for the hazardous environments of emergency incidents, the failure of the accessory or its attachment means could cause injury to the emergency responder. Because the aftermarket for certified product accessories is so broad, fire and emergency response organizations are advised to contact both the manufacturer of the accessory and the manufacturer of the certified product and verify that the accessory and its means of attachment are suitable for use in the intended emergency response environment. Emergency response organizations should seek and receive written documentation from both the accessory manufacturer and the manufacturer of the certified product to validate the following information: (1) The accessory for a certified product, and its attachment method, will not degrade the designed protection or performance of the certified product below the requirements of the product standard to which it was designed, manufactured, tested, and certified. (2) The accessory, when properly attached to the certified product, shall not interfere with the operation or function of the certified product, or with the operation or function of any of the certified product’s component parts. Users are also cautioned that the means of attachment of the accessory that fail to safely and securely attach the accessory to the certified product can cause the accessory to be inadvertently dislodged from the certified product and create a risk to the wearer or other personnel in the vicinity. 1.1.9 Nothing herein shall restrict any jurisdiction or manufacturer from exceeding these minimum requirements.



    This came from the origin of 1975:::: and the only reference to coton I found in 1975


    The fourth edition included a major change whereby flame resistant garments were no longer required exclusively; garments were allowed to be made either from flame resistant fabrics or from cotton or wool fabrics. Flame resistance performance and testing was permitted to be specified by the purchaser where desired and would be above the minimum requirements. The heat resistance and thermal shrinkage resistance requirements were retained. The heat resistance and thermal shrinkage resistance performance requirements were combined into a single requirement. The chapter on certification was reformatted by moving product labels and user information into a new Chapter 3. A new Chapter 4 on design requirements was also added.
    The 2004 edition of NFPA 1975 once again addressed the basic protection offered by these garments in non-emergency situations and the “user friendliness” of station/work uniform fabrics. The fifth edition included changes that distinguished between thermally stable materials and materials that could potentially melt onto skin under conditions of accidental flame or high heat exposure, and provided for verification and certification of station/work uniforms constructed from flame resistant fabrics.
    During the adoption process of the 1999 edition (fourth edition) of NFPA 1975, a floor amendment at the 1998 NFPA Fall Meeting removed the requirements for flame resistant fabrics and the specified flame resistance test, and instead permitted nominally 100 percent cotton or nominally 100 percent wool fabrics to be used. This led to fabric thermal stability problems, especially with wool fabrics but also with cotton fabrics that could cause or contribute to injury of the wearer. Because of the very nature of emergency services, emergency services personnel can be exposed to unknown and unexpected ignition sources during non-emergency situations when primary protective clothing is not being worn. Also, when emergency services personnel are wearing station/work uniforms constructed from these fabrics under primary protective clothing, the possibility of degradation of these fabrics exists and can lead to more severe injury for the wearer.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Nfpa 1975
    By bushrodgentry in forum Firefighters Forum
    Replies: 5
    Last Post: 09-16-2009, 09:28 AM
  2. nfpa 1975
    By fognozzle5 in forum Firefighters Forum
    Replies: 0
    Last Post: 02-08-2009, 02:30 PM
  3. Uniforms and NFPA 1975
    By Rigin1 in forum Career/Paid Firefighters Forum
    Replies: 8
    Last Post: 11-17-2005, 07:13 PM
  4. Nfpa 1975
    By Smoke20286 in forum Career/Paid Firefighters Forum
    Replies: 2
    Last Post: 02-25-2003, 08:03 AM
  5. Nfpa 1975
    By Smoke20286 in forum Firefighters Forum
    Replies: 12
    Last Post: 02-22-2003, 05:28 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Log in

Click here to log in or register