After this week's seminar presentation at Firehouse World in San Diego, many of the west coast-based fire officers who attended requested images of Boron steel inside roof pillars. In the 'W' section of my Vehicle Rescue 1-2-3 book, I have many images such as this. 'W' is for 'Work-around' which is where in the book I explain how to work around Advanced Steel such as Boron if you do not have an upgraded power rescue cutter unit.
I thought however since these images were being requested so much, I would share some additional pillar cross section images with Message Forum members.
The top shot is a cross section B-pillar from a Subaru forester. It shows multiple layers of steel plus the red which is a construction-grade rebar inside the hollow space. No Boron here; just multiple layers.
The middle image is a collection of pillars; all with Boron metal. Champion Rescue Tools allowed me to take a pix of their training props.
The bottom shot is a cross section B-pillar from a Dodge Caliber. Only the inner layer is Boron steel but it still is strong enough to shut down older cutters.
+ Reply to Thread
Results 1 to 2 of 2
02-23-2013, 07:02 PM #1
Advanced Steel Cross-section Views
02-23-2013, 07:04 PM #2
Additional cross-section views...
If you have your own collection of pillar sections, let's share!
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Tester in forum The 9-11 TragedyReplies: 0Last Post: 08-16-2012, 11:58 AM
By CAPT8005 in forum Rapid InterventionReplies: 6Last Post: 09-21-2005, 02:54 AM
By lmrchief2 in forum The Off Duty ForumsReplies: 0Last Post: 05-08-2004, 07:54 AM
By FF_Engine04 in forum Fire Explorer & Jr. FirefightingReplies: 6Last Post: 10-13-2002, 01:03 AM
By Engine 101 in forum Firefighters ForumReplies: 2Last Post: 04-27-2001, 05:28 PM