I am looking for the OSHA reg. number for the 2 in 2 out and where I can obtain a copy of the requirements on the web or by other means.
your help is greatly appreciated,
Yours in the fire service
Fireman Phil of the Show Me State
+ Reply to Thread
Results 1 to 4 of 4
Thread: OSHA 2 in 2 out regs..
03-27-2000, 09:34 PM #1fireman philFirehouse.com Guest
OSHA 2 in 2 out regs..
03-27-2000, 10:05 PM #2Ten8_Ten19Firehouse.com Guest
04-01-2000, 01:29 AM #3bgreenFirehouse.com Guest
You may also want to check out NFPA 1710 it has some interesting language on IRIT and RIT teams.
04-01-2000, 02:40 PM #4rogerkFirehouse.com Guest
29 CFR 1910.134 is as previously posted the regulation, but it's helpful to also see the final rule posted in the federal register. It has a lot of the discussion that took place before adoption, although it is pretty long.
NFPA 1500 is a lot more specific than NFPA 1710 & 1720 and is the basis for the regulation in for the most part.
The IAFF has a useful commentary on the rule also, keep in mind they were there at the rule making process.
I also refer back to a couple of formal interpretations from OSHA that can be found online.
A pretty useful resource to have on hand too, is the Fed. OSHA directive for inspection and citation procedures for compliance with 1910.134.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)