Does anyone have an SOP that addresses TIC use (what calls it goes in on, who carries it, etc., etc., etc.)? Our department received our first TIC yesterday (CairnsVIPER) and we would like to update our SOPs accordingly. Any assistance would be appreciated.
+ Reply to Thread
Results 1 to 2 of 2
Thread: TIC SOPs
06-14-2001, 11:26 AM #1pyroknightFirehouse.com Guest
06-26-2001, 05:58 PM #2TImanFirehouse.com Guest
I posted this info under thermal imaging, but it looks like some people may not have seen it there, so here it is again.
I know there a lot of people out there who are looking for information on thermal imaging, so lets all post whatever resources we know of so others can take advantage of them as well.
If your looking for thermal imagers :
Cairns www.cairnsadvancedtechnologies .com
Fire Research www.fireresearch.com
Drager / ICC www.infraredcomponents.com
If your looking for info on evaluating thermal imagers : http://thermalimager.bullard.com/tec...Eval/index.cfm
If your looking for info on legislation : http://thermalimager.bullard.com/techSpecs/politics.cfm
If your looking for info on fundraising : http://thermalimager.bullard.com/tec...rcesPublic.cfm
If your looking for articles on thermal imaging : http://thermalimager.bullard.com/tec...esArticles.cfm
If your looking for thermal imaging photos or videos : http://thermalimager.bullard.com/tec...rcesPhotos.cfm
If your looking for info on TI training : www.safe-ir.com http://thermalimager.bullard.com/index06.cfm
If your looking for information on saves with a thermal imager : http://thermalimager.bullard.com/index07.cfm
If your looking for TI SOPs : www.cfdonline.org/book3/3-iv-16.htm http://thermalimager.bullard.com/new...mar01pag05.cfm
Additional TI Sites : http://www.leta.org/ http://camerasuccess.homestead.com/
Yes many of these are on the Bullard TI website, but the informaiton is generic and can be used by anyone.
Good Luck, Be Safe,
Mike "TIman" Richardson
Bullard TI Training Specialist
PS : keep checking www.thermalimager.com new material is always being added
[This message has been edited by TIman (edited 06-26-2001).]
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)