Zeagle Regulator Recall
For immediate release
Zeagle Regulator High Pressure Seat Recall - May 21, 2003
Copyright Zeagle Systems, Inc. 2003
Zeagle Systems, Inc. is recalling 931 first stage Scuba regulators
sold between January 20, 2003 and
May 19, 2003. If you have one of these regulators it is essential to
take it to your dealer for immediate repair. Do not attempt to dive
with this regulator again until the regulator has been inspected and
by an authorized Zeagle dealer.
The first stage regulators affected are the following models:
s/n F001391 to F001476
s/n B003315 to B003652
s/n A001352 to A001571
s/n C001117 to C001403
The serial numbers are stamped on each first stage body.
Zeagle regulators that have been serviced since January 20, 2003 may
also be affected.
These first stage regulators may have a defective high-pressure
seat that could cause the first stage to over pressurize. If this
occurs, the air supply to the diver could be interrupted, making it
impossible for the diver to breathe from the regulator. This type of
failure is most likely to occur upon initial pressurization of the
regulator and is unlikely to occur underwater.
If you own one of these regulators, take it to your authorized
Zeagle dealer for a free inspection and repair. Call 1-800-771-5568
or contact any authorized Zeagle dealer for information on obtaining
a free repair. Zeagle Systems, Inc. is located at:
37150 Chancey Road
Zephyrhills, Florida 33541
SAR DIVER FOURM: