Why register? ...To Enhance Your Experience
+ Reply to Thread
Results 1 to 4 of 4
  1. #1
    MembersZone Subscriber
    Join Date
    Aug 2001
    Posts
    868

    Default SCUBA store 4500psi SCBA filling adaptors?

    Could someone please point me toward a supplier of an adaptor that would allow SCUBA diving stores to fill 4500psi SCBA cylinders?
    Busy polishing the stacked tips on the deckgun of I.A.C.O.J. Engine#1

    ...and before you ask - YES I have done a Bloody SEARCH!


  2. #2
    Forum Member
    Join Date
    Nov 1999
    Location
    Lakes Region of NH
    Posts
    344

    Thumbs up Try here...

    http://www.breathingair.com/content/...s/adapters.pdf

    Item SAS-F should do it.

    We have seperate whips off of our compressor and cascade to fill both SCBA and SCUBA.THe dive shop or your department should be able to get one of those as well from breathingair.com.
    Proud to be an American, Union Firefighter!

  3. #3
    MembersZone Subscriber
    Join Date
    Dec 2002
    Location
    Rural Iowa
    Posts
    3,106

    Default

    Yeah if you want to pay "fire service" gold plated + prices.

    Go to your local welding/industrial gas supply house. They can also hydro test your tanks (including large cascade tanks). Has been a couple of years since I purchased our hose ends (high pressure and low pressure). As I recall they were about $7.00ea.

  4. #4
    MembersZone Subscriber
    Join Date
    Aug 2001
    Posts
    868

    Default

    Thanks for that - I'll check it out. SAS-F won't do it though as the K-valve scuba end should not be used for pressures higher than 3200psi.
    Busy polishing the stacked tips on the deckgun of I.A.C.O.J. Engine#1

    ...and before you ask - YES I have done a Bloody SEARCH!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts