Thread: Aircraft Rescue
02-27-2007, 06:52 PM #1
- Join Date
- Jan 2007
Does anybody have any any info on where to obtain aircraft for an extrication class in the southeast. Also any tech on where to cut and what not to cut or persons to contact for info. Thanks.
02-27-2007, 07:32 PM #2
- Join Date
- Nov 2006
- The High Desert of Western Colorado
I'm not sure how you would come up with a plane to practice extrication. You might have to just check with some of the smaller air services at your local airport.
As far as cutting, cut parallel above and below the cabin windows on larger aircraft. This is where you are least likely to hit any lines, wiring, etc. Ideally, you want to try to gain access through the doors and emergency exits first. Small aircraft, well, if there is much left to cut you just need to watch for fuel and make sure there is no power still functioning in the plane.
I have a number of crash recovery guides in PDF format that I can share with you if you would like them. They certainly help with aircraft familiarization. Send me an email if you would like them.
You might also try contacting some of the ARFF Fire Academys such as Dallas/Fort Worth, Salt Lake City, etc. I'm not sure how much they would help without actually attending one of their programs but it might not hurt to try. They might be able to point you in the right direction to help you get what you need.
You might also post your question to the ARFF.Info forums and see if anyone there can help you.
Last edited by IMABASICEMT; 02-27-2007 at 07:59 PM.S.Davis
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Resc10 in forum Fire WireReplies: 7Last Post: 08-05-2012, 11:54 PM
By PaulBrown in forum World of Fire Daily ReportReplies: 0Last Post: 02-13-2005, 12:44 PM
By PaulBrown in forum World of Fire Daily ReportReplies: 0Last Post: 01-11-2004, 03:45 PM
By NJFFSA16 in forum Specialized RescueReplies: 0Last Post: 08-20-2002, 03:40 AM
By Wayno in forum University of ExtricationReplies: 3Last Post: 04-29-1999, 03:10 PM