CustomFire built this pumper for the Victoria, MN, Fire Department on a Sutphen Monarch chassis.
The rig, with an overall height of 11' 4" and length 33' 9," is powered with a 450-hp Cummins L9 engine and an Allison Gen 5 3000 EVS transmission.
The stainless-steel body has a stainless steel subframe with concealed bolt construction and features roll-up compartment doors.
For fire suppression, it is equipped with a Waterous CSUC20 1,500-gpm pump, 750-gallon water tank and Fire Research PumpBoss pressure governor. It has three 6" suction intakes at the rear, passenger, and officer sides.
Fire attack options include stacked, cartridge-style speedlay hosebeds, a 2" discharge on the front bumper, four 2 1/2" discharges and a 1.5”-inch discharge. Foam operations includes a 30-gallon foam tank and Aquis 2.5 foam system.
Features include steel netting buckles, a slide-In ladder compartment, ENG Brigade 3 Camera System, overhead squad storage cavities, coffin-style storage pods, OnScene Solutions sliding cargo tray and out and down cargo slides, a horizontal shutter-style power hosebed cover and a rescue tool Lazy Susan.
For emergency warning and scene lighting, it is outfitted with a Freedom IV WCX light bar, a Whelen electronic siren, Federal Q2B mechanical siren, Whelen M6 LED lights, Whelen Pioneer flood lights, a Will-Burt Sirian LED light tower, traffic directing lights and Firetech LED scene lights.
