Waterous Company 5a78ca2f71e09

Waterous Company

Departments worldwide count on Waterous to provide revolutionary fire suppression systems.
125 Hardman Ave. S.
South St. Paul, MN 55075
651-450-5000
651-450-5090
Visit Company Website

More Info on Waterous Company

Waterous Company 5a78ca2f71e09

Waterous has been making quality, American-Made firefighting related products since 1886. Still building revolutionary fire suppression systems today, Waterous holds true to the philosophy - “Cast, Machined, Assembles and Tested in America.” Departments worldwide count on Waterous to provide the utmost in quality products and customer service. What started as a single factory in the quiet riverside city of South Saint Paul, Minnesota, has grown into an internationally recognized company that continues to develop leading products and services for the global firefighting community.

Products

Waterous discharge valves trunnion design allows the ball of the valve to remain centered in the valve body via a hydraulically balanced floating seal assembly with urethane seal...
Feb. 8, 2022
Assembly of the Waterous CSU fire pump starts with heart of the pump, which is the impeller, and the backbone of that is the stainless steel impeller shaft.
Jan. 10, 2022
Waterous CX/CXS Series Fire Pumps can be mounted anywhere, driven by a variety of pump transmissions or PTOs and has a small footprint to fit virtually any apparatus.
June 4, 2020
The best-selling CS/CSU Series Single Stage Pump from Waterous is capable of up to 2250 GPM (9000 l/min).
Jan. 20, 2020
CS/CSU Model single-stage pump has a two-piece, horizontally-split body with intake and discharge passageways in a single casting.
June 8, 2018
The design allows for the separation of pump and chain case for ease of repair and is available on CM/CS Series split shaft pumps.
March 21, 2018
The Waterous CS Series single-stage fire pump is designed with a two-piece, horizontally split body with intake and discharge passageways in a single casting and on the same level...
Dec. 3, 2015
Waterous CS Series single-stage fire pumps are designed with a two-piece, horizontally split body with intake and discharge passageways in a single casting.
Sept. 3, 2015
When fighting a fire, everything counts – even water consumption – and only ONE STEP CAFSystem accounts for it all.
Jan. 1, 2015

Press Releases

The PB18 is equipped with a Briggs and Stratton V-Twin 18HP engine with a top mounted 9-quart (9.5 L) fuel tank.
May 7, 2024
The ESU1 Pump provides the power and performance of a traditional full-body fire pump in a compact, lightweight design.
May 7, 2024
Leelanau is a leader in providing manufactured and machined parts and is currently a Tier 1 and Tier 2 machined part supplier for several industries.
May 6, 2022
Waterous
Venturis Logo
The system uses the on-board air supply to create a vacuum to prime the fire pump.
May 3, 2022
The system can be trailer or apparatus mounted, configurable in a variety of options and can control up to 16 individual foam discharges via one HMI touchscreen.
May 3, 2022
The Getzville (NY) Fire Company has selected Spartan Emergency Response and its authorized dealer, Colden Enterprises, to provide the company with three Spartan Custom Pumpers...
May 25, 2021
KME Fire Apparatus has introduced the new X-Series Custom Pumper where performance, value, and reduced delivery time meet.
Jan. 11, 2021
Waterous
Bill Smith.
Waterous President and CEO Bill Smith is planning to retire on Jan. 1, 2021, and will be replaced by current Vice President of Operations Dan Reese.
Dec. 11, 2020
Receive the assurances that your Waterous pump and the heroes that use them are protected.
Nov. 20, 2020
Waterous has launched a new Pressure Governor that automatically regulates the discharge pressure at the level set by the operator within +/-2.5% of full-scale, providing more...
Aug. 26, 2020

Videos

Waterous continues the Firefighting America Series by following the Dallas Fire Department talking about recruiting, training, city challenges and firefighting.
March 4, 2019
Sand is your pump's enemy. So when it’s in your water supply it’s the number one cause of pump wear.
April 5, 2018
Waterous continues the Firefighting America Series with a trip to South Lynches, SC.
March 7, 2018
Jay Rought, Waterous Service and Training Specialist explains the operation and maintenance of Intake and Discharge Relief Valves and related systems.
July 2, 2017
C20 chain drive delivers the quietest operation in the industry.
May 1, 2017
Jay Rought from Waterous discusses basic pump theory in the “Ask Jay” series.
Dec. 19, 2016

Podcasts

Apparatus Architects Tom Shand and Michael Wilbur talk about the new fire apparatus and innovations that they found while walking the show floor at FDIC. Listen as they name their...

Blogs

Late this summer, an auction of about $8M in fire truck parts was held at the American LaFrance South Carolina plant. Where did it all go?
Oct. 21, 2014
Photo by Ed Ballam
W.S. Darley & Co. Drone
Fire tradeshows are in full swing and it's a good idea for every firefighter and fire officer to attend at least one trade show a year to learn more about products and innovations...
May 22, 2013

Articles

Tom Shand and Michael Wilbur's scrutiny of two quints and a pumper reveals how department officers and members applied their knowledge of their respective response districts to...
Dec. 9, 2025
The Lansing Fire Department worked with Pierce to build this Velocity pumper/tanker with top-mount pump controls.
June 28, 2024
Pierce built this 105-foot Ascendant mid-mount aerial platform for the City of Millville Fire Department and it has a pump and tank.
June 12, 2024
The Savage Fire Department worked with Rosenbauer to build this 109-foot Viper aerial ladder with a pump and tank.
May 1, 2024
Pierce built this pumper with a 1,500-gpm pump for the Wilmington Fire Department.
April 29, 2024
CustomFire built this enclosed, top-mount pumper for the Fertile Fire Department with a 1,000-gallon tank.
April 22, 2024
The Spartan pumper for Colts Neck Twp. Volunteer Fire Company #1 has a 2,000-gpm pump and 1,000-gallon tank.
April 1, 2024
Toyne built this custom pumper for the Springfield Fire Department on a Spartan chassis with a 1,250-gpm pump and 750-gallon water tank.
March 27, 2024
Pierce built this 2,000-gpm pumper for the Brookview Volunteer Fire Company in East Brunswick Township.
March 25, 2024
This Pierce Enforcer rescue/engine was placed in service by the Wilmington Fire Department and carries extrication, confined space and high-angle rescue equipment.
Feb. 28, 2024

Request More Information From Waterous Company

By clicking above, I agree to Endeavor Business Media's Terms of Service and consent to receive promotional communications from Endeavor, its affiliates, and partners per its Privacy Notice. I also understand my personal information will be shared with the sponsor of this content, who may contact me about their offerings per their privacy policy. I can unsubscribe anytime.

Additional content from Waterous Company

Spartan ERV built this rescue/engine for the Woodstown-Reliance Volunteer Fire Company with a 750-gallon tank, a winch and it carries multiple rescue tools.
Feb. 23, 2024
SVI built this urban interface pumper for Stratmoor Hills Fire District in Colorado Springs, CO.
Feb. 18, 2024
Lancaster County, SC, Fire Rescue took delivery of this 100-foot mid-mount Pierce Ascendant aerial platform.
Feb. 16, 2024
This top-mount pumper was built by KME for the Lawrence, IN, Fire Department on a Predator chassis.
Feb. 14, 2024
This Pierce Ascendant aerial platform was built for the Beachwood Fire Department on the Impel chassis.
Feb. 5, 2024
This tandem-axle pumper/tanker with a 2,500-gallon tank was built for Walworth Fire Rescue by Rosenbauer.
Feb. 2, 2024
This KME pumper was placed in service by the Reliable Fire Company in South River, NJ, and features a rescue-style body.
Jan. 31, 2024
Pierce built this 1,500-gpm, top-mount pumper on an International chassis for the Lower Bank Volunteer Fire Company.
Jan. 8, 2024
This week's gallery features a pair of custom pumpers for Stillwater, OK, a Type 4 pumper for Idaho and a heavy rescue going to Pennsylvania.
Oct. 13, 2023
This week's gallery includes a mid-mount aerial platform, a Type 5 brush truck and several customer pumpers.
June 16, 2023
Centrifugal fire pumps long have been the backbone of pumping apparatus in the fire service because of their efficiency and their versatility. They come in various configurations...
April 10, 2023
Deliveries this week include a hazmat rig with a slide out command center, a department's first aerial and two engines.
April 7, 2023